CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 15)

CanogaView ® Smart Element Manager
Enterprise Version 9
Make sure that Netscape Navigator recognizes the “.bin” file extension as a binary
executable file.
Display the Navigator Preferences window (Edit >> Preferences). Open the
preferences for category Navigator >> Applications, and find the “Binary Executable”
list item. Select this item and click Edit. If “bin” is not listed in the Suffixes field,
append it to the current value of Suffixes and save the change (use a comma to
separate suffix values (e.g. “uu,bin”)).
Locate the file install.htm and open it with your browser (File >> Open Page). A
browser page will open with the CanogaView Smart Element Manager image
displayed. Read the installation instructions and then proceed to the next step.
The next in the installation process is basically to locate and execute the installation
procedure which is on the CD. Locate the InstData/Hpux/Vm directory on the CD
ROM and executing the file install.bin. Proceed to section 2.2.2 below.
2.2.2 Product Splash Display
Once extracted, the installation process will display the CanogaView Smart Element
Manager product splash window that follows:
Figure 2-1: Product Splash Display