CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 45)

CanogaView ® Smart Element Manager
Enterprise Version 39
Starting from the Agent Chooser page, to access a network device, click on the desired
device to be managed, then click on the "GoTo" button. The top level view for the device
type will be displayed. You may also double-click on the domain
The following figure shows the views that are currently implemented in CanogaView Smart
Element Manager and the subsequent underlying views.
Figure 3-13. Selectable Views
Examples of the various view types follow. The 9135, 9140 and 9135G are very similar,
therefore only one is shown in this section.
Domain View
Once a specific domain is selected the chassis (both 5u and 2u chassis models) within that
domain will be presented on the page. A domain may contain from one (1) to eight (8)
chassis.
Due to performance and graphical imaging issues the chassis, when displayed at the
Domain View level, are not exact representations of the devices installed. Generic models
are displayed within each slot based upon the card type identified by the SNMP Agent and
LEDs are not displayed due to their size at this level.