CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 14)

1-2 L351 10/100BASE Media Converter
1.2 L351 Hosts
The L351 can be used in a variety of chassis. To install the L351 in a UCS 1000 or UCS 1001
chassis, you must use a Model 1230 Bus Access Module (BAM); however, you can install the L351
directly in a UCS 1002 or Model 1020 or 1030 Enclosures.
• The UCS 1000 Chassis can hold up to 15 Model 1230 BAMs with up to two L351s per BAM.
This allows a total of 30 L351s per UCS 1000.
• The UCS 1001 Chassis can hold up to two Model 1230 BAMs with up to two L351s per BAM.
This allows a total of four L351s per UCS 1001.
• The UCS 1002 Chassis directly hosts up to 14 L351s, or 13 L351s with the optional Domain
Management Module (DMM) installed.
• A standalone enclosure holds one L351.
The L351 is hot swappable; it can be inserted or removed at any time without disrupting the data
transfer of other modules in the chassis.