8 radius client screen, Radius client screen -27, Figure 4-23. radius client screen -27 – CANOGA PERKINS L351 10/100BASE Media Converter User Manual
Page 51
EdgeAccess Universal Chassis System
4.5.8 Radius Client Screen
Use the Radius Client Configuration Menu to set up communications with the Radius Server to
enable Radius Authentication of users at login. To access the Radius Client Configuration Menu,
follow these steps:
1. From the System Configuration Menu, type 6 and press <Enter>. The Radius Client
Configuration Menu appears (see Figure 4-23).
2. At the prompt, type 1 to set the mode. Type 2 to configure access to the primary Radius
server or type 3 to configure access to the alternate Radius server, and then follow the
prompts at the bottom of the screen.
3. To return to the System Configuration Menu, press <Esc>.
Figure 4-23. Radius Client Screen
Table 4-8. Radius Client Configuration Option Definitions
Menu Item
Description
Radius Client Mode
Radius then Local
Local then Radius
None
Radius Server IP
Address
Sets the address for the Radius Server. An Address 0.0.0.0 indicates
no server
Radius Server
Shared Secret
Must match the Shared Secret set on the Radius Server
Radius Server
Retries
How many times the L351 tries to authenticate the user before trying
the Secondary Server or giving up. Range is 0 to 10
Radius Server
Timeout
How long, in seconds, between unsuccessful attempts. Range is 1 to
30
Radius Server
Priority
Sets which server to contact first; Range is 1 (highest priority) to 255
lowest priority) Should priority get set the same for two servers, the
L351 will alternate tries between the servers
--------------------RADIUS CLIENT CONFIGURATION-----------------------
1.
Radius Client Mode
: None
2.
Radius Server IP Address
: 0.0.0.0
Radius Server Shared Secret
:
Radius Server Retries
: 3
Radius Server Timeout
: 5
Radius Server Priority
: 1
3.
Radius Server IP Address
: 0.0.0.0
Radius Server Shared Secret
:
Radius Server Retries
: 3
Radius Server Timeout
: 5
Radius Server Priority
: 1
Select [1-3]:
-------------------------------Messages-------------------------------
L351 10/100BASE Media Converter
4-27