CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 75)

Port Information 9145E NID Software User’s Manual
Port Configuration
61
Figure 5-9 User Port VLAN ID Translation Table
Figure 5-10 Network Port VLAN ID Translation Table
5.2.3.3 P-Bit Translation Table
The 9145E can change the P-Bit setting in VLAN ID tags on Service frames to change their
priority status in the network. To change incoming Priority Bit Translations, type 3 and press
Enter. The P-Bit Translation Table (Figure 5-11) opens.
1. To modify the P-Bit translation data, type the number of the P-Bit you wish to translate,
from 1 to 8, and press Enter. Enter the P-Bit value and press Enter. Use Tab to switch
between ports. The P-Bit will be changed on the ingress direction for the port. Press
Enter to confirm changes. Press Enter to confirm changes.
2. To Enable or Disable P-Bit translation, type 9, press Enter, and use the Space Bar to
select between Yes and No. Use Tab to switch between ports.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.16 F217 10:19:54
----------------------------PORT VLAN ID TRANSLATION TABLE----------------------
Page 1 of 1 Total 0 entries
Network <=> User Network <=> User Network <=> User Network <=> User
---------------- ---------------- ---------------- ----------------
1000 <=> 10 1010 <=> 20 1020 <=> 30 1030 <=> 40
1001 <=> 11 1011 <=> 21 1021 <=> 31 1031 <=> 41
1002 <=> 12 1012 <=> 22 1022 <=> 32 1032 <=> 42
1003 <=> 13 1013 <=> 23 1023 <=> 33 1033 <=> 43
1004 <=> 14 1014 <=> 24 1024 <=> 34 1034 <=> 44
1) Enable VLAN Translation: Yes
2) Add/Delete/Modify VLAN Translation
3) Check If VLAN In Translation Table
Select [1-3]:
CTRL-D: page down, CTRL-U: page up, CTRL-T: toggle view from user/network
------------------------------------Messages-----------------------------------