CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 92)

9145E NID Software User’s Manual Utilities
Static ARP Table
78
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and
assign them to a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries
are available.
From the Utilities menu, type 7 and press Enter. The Static ARP Table screen (Figure 7-4)
opens.
Figure 7-4 Static ARP Table Screen
1. Add an Entry - To add an entry to the static ARP table, type 1 and press Enter.
• Type in the IP address and press Enter.
• Type in the Mac address and press Enter.
• Type in the port number and press Enter.
The address information will be added to the table.
2. Delete an Entry - To delete an entry from the Static ARP Table, type 2 and press Enter.
The first table entry will be highlighted. Use Space to scroll down the entries. Press Enter
to delete the highlighted entry. Press Esc to return to the Utilities menu.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-1970
Model 9145E-104-0-0 V43.12 F214 00:05:33
------------------------------------STATIC ARP TABLE---------------------------
IP Address MAC Address Port
--------------- ----------------- ----
92.168.1.102 45-54-25-88-74-22 User
94.148.1.156 46-57-55-81-73-21 Mgmt
45.122.4.121 44-52-44-23-76-98 Net
97.198.3.246 67-76-65-56-45-54 User
94.133.1.765 68-63-22-19-76-55 Net
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages-----------------------------------