Daiwa TANACOM 1000 - Manual (Page 22)

20
Line feeding function
The line feeding function lets our line with the motor assisting the spool.
- The line feeding mechanism begins to work at a depth of 2.5 m
below the pre-set auto stop depth.
- If the clutch becomes ON while the reel is furnishing line, the
spool begins to rotate to avoid line slack.
- Speed of the line going out is adjusted with 32 speed levels
ranging between 0 and Hi. It is adjusted in the line feeding
mode.
1.
Press the MODE BUTTON to show the line feeding speed
adjustment display. Default setting is zero (OFF).
Set the speed level with the power lever.
2. Press the MODE BUTTON three times to show 0.0 (depth
counter) to complete.
The will blinks.
While the reel is feeding line with this function, its speed cannot
be changed.
OFF
(adjustment of
line furnishing)
(the figure corresponds
to the case of setting to 5)
Functional setting operation
(4. Line feeding function)