Citronic CDUSB-2 - Manual (Page 2)

170.663UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the CDUSB-2 CD/USB/SD player as part of your playback system. This product has
been developed to provide a flexible, high quality audio source for PA, background music and DJ applications.
Please read and keep this manual to achieve the best results from the unit and avoid damage from misuse.
Package Contents

CDUSB-2 CD/USB/SD player 2U

IR remote control + batteries

Mains lead(s)

User manual
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer
at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself
as this will invalidate the warranty. We recommend you keep the original package and proof of purchase for
any possible replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on the housing or disc drawer, stop using immediately, allow unit to dry out and have
checked by qualified personnel before further use.
Avoid impact or heavy vibration to any of the components.
No user serviceable parts inside - refer servicing to qualified service personnel.
Safety
 Ensure that the correct mains lead is used and that the mains voltage is as stated on the unit
 Avoid ingress of water or particles into any part of the housing
 Do not place heavy objects on the disc drawer when ejected
Placement
 Keep the console out of direct sunlight and away from heat sources
 If rack-mounting, ensure that there is adequate support for the weight of the CDUSB-2 and that items
racked above it do not place too much pressure to the top of the housing
 Allow adequate space for the rear connections and avoid leaving controls exposed to possible damage
 Allow adequate space for the disc drawer to eject at the front of the unit and USB devices to be inserted
Cleaning
 Use a soft dry or slightly damp cloth top clean surfaces of the control panels
 A soft brush can be used to clear debris from between controls without damaging them
 To avoid damage, do not use solvents to clean the components
 A standard cleaning compact disc may be used if the player begins to have difficulty reading discs