Revision history – Dynon Avionics Heated AOA/Pitot Probe User Manual
Page 4
iv
AOA/Pitot Probe and Heated AOA/Pitot Probe Installation Guide Rev. C
IN NO EVENT SHALL DYNON AVIONICS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER
RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES AND COUNTRIES
DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Dynon Avionics retains the exclusive right to repair or replace the instrument or firmware or offer a full refund of the purchase price at its sole
discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
These instruments are not intended for use in type certificated aircraft at this time. Dynon Avionics makes no claim as to the suitability of its
products in connection with FAR 91.205.
Dynon Avionics’ products incorporate a variety of precise, sensitive electronics. SkyView products do not contain any field/user-serviceable
parts. Units found to have been taken apart may not be eligible for repair under warranty. Additionally, once a Dynon Avionics unit is opened
up, it is not considered airworthy and must be serviced at the factory.
Dynon Avionics Returns and Warranty web page can be found
Revision History
Revision
Revision Date
Description
A
February 2007
Initial release
P/N 100740-000
B
February 2007
Changed references to the tube being sealable to note the likelihood of a leak.
Document number remains 100740-000
C
October 2014
Combined AOA/Pitot Probe Installation Manual and Heated AOA/Pitot Probe
Installation Manual.
Extensively updated concurrent with release of redesigned Heated AOA/Pitot Probe.
Document number changed to 100740-001.