Esc s – CBM America iDP3240 User Manual
Page 100
Advertising
— 81 —
ESC S
[Function]
Selecting STANDARD MODE
[Code]
<1B>H<53>H
[Outline]
Switches from PAGE MODE to STANDARD MODE.
[Caution]
• This command is only effective if it is entered when in PAGE
MODE.
• Any data mapped in PAGE MODE is erased.
• After this command is executed, the beginning of the line is
taken as the next print start position.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for
STANDARD MODE and PAGE MODE, are changed to the
settings for STANDARD MODE use.
(1) Spacing setting:
ESC SP
(2) Line feed width setting: ESC 2, ESC 3
• STANDARD MODE is selected when the printer is turned on
or reset, or when ESC @ is executed.
[See Also]
FF, ESC FF, ESC L
Advertising