Leica Geosystems Leica GeoAce User Manual
Page 29
GeoAce, Leica GeoAce RTK Base Station User Interface
29
Fixed Position
Manually set the instrument to report a fixed position or automatically take over posi-
tion data from other operating modes (e.g. Snap Previous and Averaged). This
position will be used unless the position mode or the Fixed Position is changed.
When position data are available simply switch to Fixed Position mode. The
position values will be taken over. No further set up is required.
At an unknown position the long time Averaged (e.g. 12 or 24h) function-
ality can be used to acquire accurate position data. When the averaging is
done and position data are available, simply switch to Fixed Position mode.
Input formats:
•
Latitude and longitude - in degrees / minutes / seconds or decimal degrees
•
Height - in meters or feet
How to set position values manually:
1) To enter a fixed position select Latitude, Longitude or Height and press
. Use the
navigation keys to move the cursor and to change the
settings to the required value.