Leica Geosystems Leica GeoAce - Manual (Page 74)

74 GeoAce, Setup
Real-time refer-
ence setup
step-by-step This list references to "Real-time reference setup with internal modem".
a) Whip antenna
b) Antenna bracket
c)
Antenna cable
d) GeoAce RTK Base Station with
internal radio (if applicable)
e) GEV219, 1.8m Power Cable
f)
Tripod
g) External 12V battery (not included)
h) GEV71, 12V Car Battery adapter
Step Setting Up the Equipment
1. Set up the tripod (f).
2. Install the antenna (a) at the bracket (b) on the tripod.
3. Place and lock the GeoAce (d) onto the tripod (f).
4. Connect the antenna cable (c) at the GeoAce (d).
5. Connect the GEV71 Car Battery adapter (h) with the battery cable (e) and
the GeoAce (d).
6. Connect the GEV71 Car Battery adapter (h) to an external battery (g).