Setting the date and time, Setting your logo, Setting the date and time setting your logo – Panasonic KXF1100 User Manual
Page 12: Initial preparation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Initial Preparation
Before using your unit, program the foiiowing:
•Current date and time
•Your logo
•Your facsimile telephone number
This information will be printed on the top of each page transmitted from your unit.
Setting the date and time
1
2
3
4
Press [MENU],
SYSTEM SET UP
SET DATE & TIME
Press (^, then [[].
Press [START/SET].
Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
Then press @ for AM or press @ for PM.
Example: Aug. 10 1995, 3:00PM
Press
00
0000
00,
then press 0 for PM.
5
6
Press [START/SET].
Press [MENU].
(STOP)
Note;
•When you make a mistake while programming,
press [ STOP 1 then make the corrections.
•The accuracy of the clock will be approximately
±60 seconds a month.
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
Press [MENU].
1
2
3
4
5
6
SYSTEM SET UP
Press [«], then [0 [0.
YOUR LOGO
Press [START/SET].
LOGO=
Enter your logo up to 30 characters.
(The preset logo will be cleared.)
• Refer to the instructions on page 13.
Press [STA^/SEf].
Press [MENU].
12