Panasonic KX-RC95 - Manual (Page 51)

Troubleshooting Guide
Trouble Cause Procedure
The display shows
"CHANGE LITHIUM
BATTERY" and CPA
will not accept any
key function.
The life of the lithium
battery is terminated.
Gc to a service center to
have the battery pack
exchanged.
(See the Included list of
authorized service centers.)
CPA does not print
correctly or printing
is blurred.
The ribbon cassette
is not installed or is
installed incorrectly.
Install ribbon cassette
correctly. (See p. 54)
The ribbon cassette
is run out.
Replace with new ribbon
cassette.
(See P. 54)
The printing
positions are not
correct.
The printing
positions are set
incorrectly.
Set the printing positions
correctly. (See p. ZD)
A check is not fed. A check is not set
on the printer
correctly.
Set a check on the printer
correctly.
(See p. 19)
The display shows
"MEMORY ERROR”.
CPA does not
operate properly, or
memory may contain
garbled characters.
Noise on the AC line
or static electricity
may prevent CPA
from operating
properly.
Turn the power switch oft
for a few seconds then
turn the power switch on
again. If the CPA.does not
function properly, reset
CPA (p- 53), and then
print the records on the
paper roll. If the CPA still
does not function properly,
perform a total reset
following the procedure on
p. 14.
Q
o
3
D>
Troubleshaoting
51