Reloading a recording paper – Panasonic Panafax UF-130 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Reloading a Recording Paper
Your facsimile machine uses a roll of special recording paper. You can easily load
paper yourself by following the steps below.
1, Open the Receiving Unit (Control Panel) by
depressing the latch button.
2. If there is the used roil inside, lift it out and
set a new roll in its place. Be sure the direc
tion of the roll is as shown below.
3. Close the Receiving Unit carefully by press
ing both ends gently until you hear the
cover lock into position.
4, Tear the recording paper projecting from
the unit by hand. Remove this cut paper.
4
a
u
u
64
Advertising