Cleaning the feed and head rollers – Panasonic Panafax UF-130 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Feed and Head Rollers
The transmitting feed roller and head roller in your machine will gradually accumu
late dust and black, sootlike particles in the course of regular use. You should there
fore clean these rollers using the following procedure approximately once every three
months.
1. Open the Receiving Unit by depressing the
latch button on the right side panel, and
swing the Receiving Unit forward.
2« Unlock the Document Feed Unit by gently
pressing outward the two black tabs locat
ed at the right and left ends of the unit.
When you see the Document Feed Unit
open, raise it up gently.
3. Wipe the Transmitting Feed Roller (white
roller) gently with a soft, clean cloth soaked
with ethyl alcohol, while rotating the roller
slowly towards the front of the machine with
your fingers.
4, Clean the Head Roller (black roller) in the
same way, only rotate the roller towards the
back of the machine as you wipe it.
Head Roller
Transmittimg
Feed Roller
66