To rewind or fast forward the tape, To search a particular spot on a tape, Automatic playback relay (deck 2 to deck 1) – Panasonic RX-DT650 User Manual

Page 18: Full autostop

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

You can use either deck 1 or deck 2 for tape playback by following the same steps.

RÉW/HEV FF/CUE

PAUSE

1

C

TAPE

Press TAPE.

2

"'

STOP/

STOPfiJECT

Press STOP/EJECT, insert the

tape and close the cassette

holder.

Reverse side

With the side
to be played
facing you

Press PLAY to start play.

To stop play:

STOP/DECr

Press STOP/EJECT.

To stop play temporarily:

Press PAUSE.

PAUSE

To resume play:

Press PAUSE again.

References

If you leave the unit in the stop mode for about four minutes, it will

lly turn itself off.

Type of tape which can be played on this unit:

Normal/TYPE I

0

Cr02/TYPE II

X

Metal/TYPE IV

X

To rewind or fast forward the tape

REW/REV FF/CUE

In the stop mode, press REVWREV
or FF/CUE.

Do not press PLAY during rewinding or fast forwarding, as this may

jam the tape. Be sure to press STOP/EJECT before proceeding to the

next operation.

To search a particular spot on a tape

REW/REV FF/CUE

During playback, press REW/REV

or FF/CUE.

Tape play is resumed when the button is
released.

Automatic playback relay

(Deck 2 to Deck 1)

When Deck 2 playback has finished. Deck 1 playback starts

automatically.

1

Insert the playback tapes into Deck 1 and Deck 2.

2

Press Deck 2 PLAY.

3

Press Deck 1 PAUSE, then press PLAY.

Full autostop

During playback, recording, fast forward or rewind when the tape
reaches its end, the automatic stop system will release the operation
buttons.

Advertising