Unit and cassette information, Erase protection (record tab), Maximum record/playbacktime – Panasonic PV-M1367AD User Manual

Page 5: D.s.t. (dayiight saving time), Spring (first sunday in april), Autumn (last sunday in october), Self-demo mode, Reset aii combination vcr memory functions, Head cieaning, Video heads sensor system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Unit and Cassette Information

Erase Protection (Record Tab)

Cassettes have a record tab to ensure that

recordings are not accidentally erased.

To prevent accidental
erasure, break off the tab
with a screwdriver.

To record again, cover the

hoie with cellophane tape.

I____

Maximum Record/PlaybackTime ]

Only use tapes with the №1 mark in this unit.

Tape Speed

Setting

Type of Video Cassette

T60

T120

T160

SP
(Standard Play)

1 Hour 2 Hours

2 Hours

40 minutes

LP
(Long Play)

2 Hours 4 Hours

5 Hours

20 minutes

SLP
(Super Long Play)3 Hours 6 Hours

8 Hours

[ D.S.T. (Dayiight Saving Time)

spring (First Sunday in April)

When the Combination VCR is set to DST:ON, it

automatically adds one hour and adjusts the clock.

NORMAL TIME

1:00 a.m. 2:00 a.m.

DAYLIGHT

-------- ►

SAVING TIME

3:00 a.m. 4:00 a.m.

Autumn (Last Sunday in October)

When the Combination VCR is set to DST:ON, it

automatically turns back one hour and adjusts the
clock.

DAYLIGHT

SAVING TIME

1:00 a.m. 2:00 a.m.

NORMAL TIME

1:00 a.m. 2:00 a.m.

SELF-DEMO MODE

In Power ON condition, hold down PLAY/REPEAT

on the Combination VCR, with no tape inserted,
for 5 seconds. The demo screen appears.

To cancel: Repeat the above operation. The demo

screen disappears.

Reset aii Combination VCR Memory Functions

Use when moving the Combination VCR to a new location, or if a
mistake was made in the One Time Setup section.

• Make sure a tape is not inserted in the Combination VCR.

1) Push POWER to turn the Combination VCR on.

2) Hold down both the PLAY and REW buttons on the

Combination VCR for more than 5 seconds.

* The power will shut off.

3) Turn the power back on and perform the One Time Setup

section on page 10.

Head Cieaning

Your Combination VCR will not normally require head cleaning,

however the heads may become clogged when playing an old or

damaged tape.

Video Heads Sensor System

If head cleaning becomes necessary, the

Combination VCR will display the screen
at right while playing back a recorded
signal. To exit this screen, push PLAY on

the remote control or Combination VCR.

• Use “dry” type head cleaning

cassette* only.

• Be sure to follow the cleaning tape instructions carefully.

Excessive use of a cleaning cassette can shorten head life.

• If using a head cleaning cassette does not solve the

problem, contact your nearest Factory Service Center or
authorized Service Center. (See page 26.)

'Cleaning cassette part No. NV-TCL30PT is recommended.

VIDEO HEADS MAY

NEED CLEANING
PLEASE INSERT HEAD

CLEANING CASSETTE
OH REFER TO MANUAL

END:PLAY KEY

Product Specifications

Display

Picture Tube:

VCR

Video Recording System:
Audio Track:
Tuner:

Broadcast Channels:

CATV Channels:

FM Radio

Band range:

General

Power Source:

Power Consumption:

13 inch measured diagonal 90°

deflection Picture Tube

2 rotary heads helical scanning system

1 track

VHP 2'-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CATV channel 5A (01)
Ultraband 65-94, 100-125

87.5-108.1 MHz

120V 60 Hz (AC)
12V (DC)

Power on

Approx. 73 watts (AC)
Approx. 95 watts (DC)

Power off

Approx. 6 watts (AC)
Approx. 9 watts (DC)

EIA Standard NTSC color

1 piece

41°F-104°F (5°C-40°C)

10%~75%

28.6 lbs. (13 Kg)

15-

3/16” (W) XI5-3/16” (H)X

16- 11/16”(D)

386 (W) X 385 (H) X 424 (D) mm

Note: Designs and specifications are subject to change without notice.

Television System:

Speaker:

Operating Temperature:
Operating Humidity:
Weight:

Dimensions:

Advertising