Adding audio to recorded pictures (audio dubbing), 1 press the [menu] button, 2 press a/t to select [audio dub.] and then press – Panasonic DMC-LC43A User Manual
Page 67: 3 press ◄/► to select the picture, 6 press the [menu] button 2 times
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical use
Adding Audio to Recorded Pictures
(Audio Dubbing)
PLAY1/2
orimoTECT
DPOF PRiWT
iraggaiMsa-flMmiiiii
3,4
im
lOO-OOOi.
mmm
SELECT4»^
STARTS
It is possible to add a 10-second narration to
a recorded picture.
[Preparation]
♦ Set the mode dial to playback [[0]. (P23)
1
Press the [MENU] button.
2
Press A/T to select [AUDIO DUB.] and
then press
> .
3
Press ◄/► to select the picture.
4
Press the Y/[REVIEW/SET] button, to
start audio recording. (0 Microphone)
• When audio has already been recorded,
after the audio dubbing the original audio
is overwritten.
• When audio has already been recorded,
this message is displayed “OVERWRITE
AUDIO DATA?”. Then press ◄/► to
select [YES] and press the
T/[REV!EW/SET] button, to start audio
recording.
5
Press the T^REVIEW/SET] button, to
stop audio recording.
• Even if you do not press the
▼/[REVIEW/SET] button, after about
10
seconds the audio recording stops
automatically.
6
Press the [MENU] button 2 times.
• The menu will disappear.
• Adding audio will use additional memory.
Using this feature will result in fewer images
being able to be saved.
• The audio dubbing cannot be used with
motion images.
• The audio dubbing cannot be used with
protected images.