Caurm, Power cord, On/off switch – Panasonic MC-V6950 User Manual
Page 9: Handle adjustments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO OPERATE CLEANER
A
CAurm
Do not use outlets stove counters Damage to items in the surrounding areas
could {>ccur. Be sure the switch IS in the off position while plugging the cord in
POWER CORD
NOTE To reduce the risk of electrical shock, this vacuum has a polarized plug, (one blade is wider
than the other) This plug will fit In a polarized outlet only one way If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install the proper outlet
DO NOT CHANGE THE PLUG IN ANY WAY
1 Plug the power cord into a 120V outlet
ON/OFF SWITCH
To start the vacuum cleaner, push
the switch on the top of the dust
compartment to the ON position
To stop the vacuum cleaner, push
the switch on the top of the dust
compartment to the OFF position
HANDLE ADJUSTMENTS
The handle may be lowered
to any position required Just
step on the area as indicated
by the illustration and
lower the handle as
desired
1 Upright position
The handle locks in this
position for storage
The handle should
always be in an
upnght position when
the cleaning tools
are used
2. Middle position
This position IS for
normal cleaning
3 Low position
This position
IS used for
cleaning
under
furniture
fA
- 9 -