Selecting the remote code no. for remote operation, Single digit 1 to 9, Note – Panasonic AUTO-LOGIC KX-F3500 User Manual
Page 30: Preparing the answering machine (cent.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing the Answering Machine (cent.)
Selecting the Remote Code No. for Remote Operation
A remote code helps to protect from unauthorized persons accessing your unit and retrieving your messages.
The remote code No. has been set to 111 at the factory. However, you may choose another code from within the following
ranges;
Single Digit
1 to 9
Double Digit
11 to 99
Triple Digit
111 to 999
1
Push FUNCTION.
2
Push REDIAL or MUTE until the following message
is displayed.
3
Enter the desired Remote Code and then push
AUTO/MEMORY
(e.g. If the remote code is 123)
4
Push FUNCTION to end the operation.
NOTE:
You cannot use codes which include zero (0). We
recommend that you do not use seven (7) as code
No., since this number is used to control other
remote function.
2-2