Panasonic NV-F55EA - Manual (Page 11)

Installation
Connection to a TV Set VTR/TV Selector Button
Connect the external aerial to the RF Input Socket on
the VTR.
Connect the aerial terminal on your TV set to the RF
Output Socket on the VTR with the supplied DIN-DIN
Coaxial Cable.
Connect the AC Mains Lead to the AC Mains Socket
of the VTR to the mains outlet.
If the TV set is equipped with separate video and audio
input sockets, it is recommended to connect the VTR to
the TV set with separate video and audio cables.
With this button, distortion caused by interference between
TV broadcast signal and output signal from the VTR (VHF
channel 2 or 3) can be prevented. Use this button according
to the following table.
From the RF Output Socket of the VTR either signals of TV
broadcasts or from the VTR (RF convertor) are output.
k
——
■yFP''-*-
' ' ' ' ■ > H
iSi«
TV ■■'eception is
possible.
None
■ ■ - ■
&rofr:':x;
TV reception is
not possible.
TV reception is
not possible.
VTR
VTR
TV reception can only be restored by pressing the VTR/TV
Selector Button. The “VTR” Indication in the Display will
disappear.
Connection to a Stereo Amplifier
Stereo Amplifier Not supplied
1 Connect the Audio Input Sockets on the VTR to the
REC OUT Sockets on the Stereo Amplifier.
2 Connect the Audio Output Sockets on the VTR to the
PLAYBACK Sockets on the Stereo Amplifier.
11