Dimension of mounting bracket, Cautions on installation – Panasonic WV-BP70 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■2. Insert the camera fixing screw of the camera
mounting bracket into the camera mounting hole
and tighten the screw firmly.
DIMENSION OF MOUNTING BRACKET
3,
4.
Connect the camera and monitor with the coaxial
cable and turn on the power switch of the monitor.
While viewing the monitor picture, loosen the
angular control screw slightly. Adjust the camer
a's angle to the desired position, and then tighten
the screw firmly.
Angular Control Screw
Cautions on installation
Use wood screws with the camera mounting bracket
that are suitable for Installation into a wood base of
appropriate dimensions and strength. For the installa
tion into a material other than wood, refer servicing to
qualified service personnel.
-11-