Panasonic WV-BP70 - Manual (Page 8)

CONNECTIONS Connection Diagram
Cautions:
1, Keep the Power Switch of the monitor, optional
Camera Extension Unit and optional Remote
Control Unit in the OFF position during connection.
If the power of these units are ON during connec­
tion, the camera will not function due to the protec­
tion circuit for misconnection.
2. Connect only the specified monitor WV-BM80WV-
BM90A or Camera Drive Unit WV-PS11A, WV-PS
104B or Camera Extension Unit WV-83.
■ BASIC SYSTEM
Connect the single coaxial cables between the cam­
eras and monitor WV-BM80 (CAMERA INPUT), The
approx, maximum cable length is as;
Coaxial
Cable Type Maximum
Cable Length DC Maximum Loop
Resistance
RG-59/U
RG-6/U
330 ft 100 m
825 ft 250 m
Less than 30 ohms
Less than 12 ohms
The maximum DC resistance between the camera
and monitor is 10 ohms.
-6-