Before use, Parts identification, Charging – Panasonic ES7003 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before use

This W et/Dry shaver can be used for

wet shaving with shaving lather or for

dry shaving. You can use this water­

tight shaver in the shower and clean

it in water.Treat yourself to wet lather

shaves for at least three weeks and

notice the difference. Your Panasonic

W et/Dry shaver requires a little tim e

to get used to because your skin and

beard need about a m onth to adjust

to any new shaving m ethod.

Charge the shaver for at least 8 hours

before using it for the first tim e or

when it has not been in use for m ore

than six m onths.

Parts identification

(see fig. 1)

@ Protective cap

(B) System outer foil

© System outer foil release but­

tons

® Foil frame

© Inner blades

© Foil frame release buttons

© On/Off switch

® Switch lock button

® Charge indicator lamp

@ Trimmer

® Trimmer switch

© Charging adaptor with auto­

matic voltage adjustment

® Wall mount

® Wood screws

© Travel pouch

How to use the wall mount

DANG ER- To reduce risk of death by

electric shock, do not install where

the unit can fall into a tub or sink.

The charging adaptor can be hung

on the wall using wood screws (in­

cluded).

1. Select an appropriate location on

the wall where the screws can go

in.

2. Attach the wall m ount to the wall,

as shown, with the wood screws,

m aking sure that the arrow points

up.

3.

Slide

the

charging

adaptor

grooves into the wall m ount until

it clicks in.

To rem ove the charging adaptor from

the wall m ount, slide the adaptor up­

ward.

Charging

(see fig. 2)

Place the charging adaptor upright

on a fiat surface or m ount it on a wall.

Plug the adaptor into an AC outlet.

It will adjust autom atically to voltages

between 100-120 and 220-240V AC.

In som e areas, a special plug adap­

tor m ay be required.

Switch the shaver to the “0 • charge”

position and place it upright into the

charging adaptor with the switch fac­

ing toward the front.

The charge indicator lam p will glow

and it will stay on until the shaver is

rem oved from the adaptor.

You can fully charge the shaver in 8

hours if it seem s to be losing speed.

Advertising
This manual is related to the following products: