Before use, Parts identification, Charging – Panasonic WET/DRY RECHARGEABLE SHAVER ES4012 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before use

This Wet/Dry shaver can be used for

wet shaving with shaving lather or for
dry shaving. You can use this water­
tight shaver in the shower and clean

it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic

Wet/Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust

to any new shaving method.

Charge the shaver for at least 12
hours before using it for the first time

or when it has not been in use for
more than six months.

Parts identification

(see fig. 1)

(§>

Protective cap

(§} Outer foil release buttons

(g) Foil frame

(§) Outer foil

© Inner blades

© Foil frame release button

© On/Off switch

® Switch lock button

0 Charge indicator lamp

© Trimmer

© Trimmer switch

© Charging adaptor with auto­

matic voltage adjustment

Wall mount

© Wood screws

(§) Travel pouch

How to use the wall mount

DANGER- To reduce risk of death by

electric shock, do not install where
the unit can fall into a tub or sink.
The charging adaptor can be hung
on the wall using wood screws (in­
cluded).

1. Select an appropriate location on

the wall where the screws can go

in.

2. Attach the wall mount to the wall,

as shown, with the wood screws,
making sure that the arrow points
up.

3.

Slide

the charging adaptor

grooves into the wall mount until

it clicks in.

To remove the charging adaptor from
the wall mount, slide the adaptor up­
ward.

Charging

(see fig. 2)
Place the charging adaptor upright

on a flat surface or mount it on a wall.

Plug the adaptor into an AC outlet.
It will adjust automatically to voltages

between 100-120 and 220-240VAC.
In some areas, a special plug adap­

tor may be required.

Switch the shaver to the “0 • charge"

position and place it upright into the
charging adaptor with the switch fac­
ing toward the front.

The charge indicator lamp will glow

red and it will stay on until the shaver
is removed from the adaptor.

You can fully charge the shaver in 8

hours if it seems to be losing speed.

A full charge will supply enough
power for about 7 shaves (three min­

Advertising