Panasonic WET/DRY RECHARGEABLE SHAVER ES4012 - Manual (Page 9)

cord to connect the charging adap­
tor to an outlet.
• The shaver may not immediately
begin to charge after being placed
into the charging adaptor after use.
Allow the shaver to sit in the charg­
ing adaptor for a few minutes and
check again to make sure that it is
being charged.
• Do not place any metal objects like
coins and paper clips on the charg­
ing adaptor as they will become
warm.
• Grip the plug when disconnecting
the charging adaptor from a recep­
tacle; tugging on the cord may dam­
age it.
• Store the charging adaptor and its
cord set in a dry area where it will
be protected from damage.
• The outer foil is very thin. If han­
dled improperly, it can be easily
damaged. To avoid personal injury,
do not use the shaver if it has a
damaged foil or inner blade.
• Wash the shaver in tap water. Do
not use salt water or boiling water.
Also, do not use cleaning products
that are designed for toilets, bath­
rooms or kitchen appliances. Do
not submerge the shaver for a long
time.
• Do not wipe any part of the shaver
with thinner, benzine or alcohol.
Clean it by using a cloth dampened
with soapy water.
• Do not take the housing apart as
this can affect the watertight con­
struction.
Specifications
Power source: 100-120/220-240V
AC, 50-60 Hz (Automatic voltage
conversion)
Motor voltage; 1.2 V DC
Charging time: 8 Hours
This product is intended for house­
hold use only.
READ ALL INSTRUCTIONS BE­
FORE USE.
Service-Assistance-Accessories
800-338-0552
panasonic.com/personatcare
9