Panasonic CT-13R23 - Manual (Page 16)

Channel Caption This feature allows you to enter the call names of up to
30 stations into memory (using up to 4 characters for
each station) The call name will then display along with
the channel number when changing channels or
pressing RECALL
Located On Remote Control
CH 03
VYY7 < ChannBlCaplian
(Stalianldsntifier)
1 Press the ACTION button to display the Mam Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Channel Caption Icon
3 Press the ACTION button to select and display the
Channel Caption Menu
Helpful Hints:
When the Maximum amount of station identifiers are
entered, “FULL" will be displayed in the caption
position
4 Press the VOL LEFT or RIGHT button, or use the
Remote Control Keyboard (0-9), to enter the
channel number you wish to assign a Station
Identifier
5 Press the CH DOWN button to highlight "ENTER
CAPTION"
6 Press the VOL LEFT or RIGHT button to select first
character in Station Identifier Then press the CH
DOWN button to move cursor to the second position
and repeat until the complete Station Identifier is
entered (up to 4 characters)
7 Press the CH UP or DOWN button to highlight
"ENTER CHANNEL NUMBER" Then repeat steps
4 through 6 to continue adding Channel Station
Identifier(s)
B Press the ACTION button twice to exit the Channel
Caption Menu
NOTE' To delete a Channel Caption (Station Identifier)
from memory all four character positions in the
“ENTER CAPTION" area must display a dash
mark (-)
- 1 6 -