Connecting the telephone line and supplying power – Panasonic Panafax UF-120 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Telephone Line and Supplying Power
Connect the plug end of the telephone line cord into the telephone jack or other equiva
lent supplied by the telephone company. Usually service personnel will connect the
machine to the telephone line for you.
To supply power, just connect the Power cord and plug in the machine. The power
lamp on the control panel should light up.
Your machine uses little power, and you should keep it on at all times. If you keep
the machine unplugged for too long, the memory contents, such as ID number and
the Abbreviated numbers, will be lost.
In case of power failure the memory is backed up by the built-in battery up to 7 days
if it is fully charged.
NOTC 1
, If you wish to use a telephone set other than the one supplied with the machine,
connect it to the ‘TEL" jack on the back of the machine with a telephone line cord.
2. The type of telephone line cord and power cord vary depending on the country.
3. Disconnect the telephone line cord before disconnecting the power connection prior
to relocating the equipment, and reconnect the power first.
4. If the power cord is damaged, it must be replaced by the special cord only available
from authorized Panasonic service centers.
12