Panasonic PV-M2738 - Manual (Page 22)

qah y (^ r P1 us + Setup
Easy Taping.
VCR Plus+ programming allows you to set most items ot a timer recording by simply entering a special code (PiusCode)
found in TV GUIDE magazine as well as the TV listings in selected newspapers. In order for your Combination VCR to do a
VCR Plus+ recording, or a timer recording of cable stations, some setup is required.
At first, choose your Connection
Type.
(Then, follow the instructions under the diagram.)
Connection Type A ]
<CABLE BOX COMBINATION VCR>
CAhif
Antenn«
RF Coaxial СаЫе Back of
{notsupplied) Combinstion VCR
Front of
Combination VCR
If your system looks like this, do the
following.
1. Complete the "Cable Box Setup”
section at right.
2. Skip page 23 and go directly to page
24 for VCR Plus+ Programming.
Connection Type В
<CABLE or ANTENNA ^ COMBINATION VCR>
Back of
Combination VCR
If your system looks like this, do the
following.
1. Skip the “Cable Box Setup”
section at right and turn to page 23.
2. Complete the “VCR Plus+ Channel
Setup” section on page 23.
3. Turn to page 24 for VCR Plus+
Programming.
VCR Plus+ and PiusCode are
trademarks of Gemstar Development
Corporation.
The VCR Plus+ system is manufactured
under license from Gemstar Development
Corporation,
22
Cable Box Setup
For Connection Type A (see left) only
1
Press MENU to display the
MAIN MENU.
2
Press AT ◄ ► to select
“CH,” and then press MENU
to display the SET UP
CHANNEL screen.
MAIN MENU
rol
Ш
TV VCR~ lANfillAflF
«В [o] ШТ
CH ЙЙбГ EXIT
SELECT:* ▼ ► KEY
SET ;MENU KEY
Press AT to select “CABLE
BOX SETUP,” and then
► to set.
--- SET UP CHANNEL ---
ANTENNA SYSTEM : CATV
ALTTO SET
egaasEBiiHa
VCR PIUS+ CH SET UP
SELECT : A ▼ KEY
SET :► KEY
END :MENU KEY
4
Press AT and to select
“YES” or “NO,” and then
press ► to set.
Select YES if all channels are
received via the cable box
(connection “A” at left). Then, go
to step 5.
Select NO if your cable connection resembles “B” at
left. Press MENU to exit and turn to page 23.
ARE YOU US 1NG
A CABLE BOX?
YES
ntn
SELECT:* r KEY
SET :► KEY
END :MENU KEY
Press AT to select Cable
box output channel number,
and then press ^ to enter.
• If necessary, refer to your cable
box manual.
• If you are using AudioA/ideo jack
connection for your cable box,
select and set “VIDEO OUT as
the output channel.
ENTER CABLE BOX OUTPUT
CHANNEL
EO
SELECT ▼ KEY
YOUR TV IS RECEIVING
THE OUTPUT OF CABLE BOX
CH 01
This display appears for
5 seconds. (Channel
shown is example only)
6 Press MENU twice to end the setup and return to
the normal screen.
Go directly to VCR Plus+ Programming on page 24.