Panasonic PV-M2738 - Manual (Page 24)

Q*#-- y (];
r p
1
us
+ Programming
Easy Taping.
Ix^Before you begin, make sure.
Q The clock is set.
Q VCR Plus+ Setup is complete
(See pages 22,23).
PROGRAM TIMER Indicator
Use normal Timer Recording
steps if;
• the PlusCode for a program is
not listed.
• you anticipate the program, such
as a sporting event, to run over
the scheduled stop time.
See page 19 to:
• cancel a timer recording in
progress.
• replace program contents.
• review or clear program contents
once set.
1
Press PROG to display the SET
PROGRAM screen.
2
Press AT to select “VCR
PIUS+ PROGRAM” and then
press ► to display the Plus
Code screen.
............SET PROGRAM.....................
VCR Plus* PROGRAM
TIMER PROGRAM
ENTER PLUSCODE NUMBER
n I/
USING 0-9 KEYS
END :PR0G KEY
3
Press NUMBERED keys to enter
the PlusCode number from your
local TV listings.
To Make Corrections
Press -4 repeatedly to delete the PlusCode
number. Then, enter the correct number.
ENTER PLUSCODE NUMBER
123456
USING 0-9 KEYS
BACKSPACE: -4 KEY
ENTER :PFOG KEY
4
Press PROG to lock in your program.
5
Press the 1, 2, or 3 key to select
the program type.
1 ONCE
2 DA I LY (MON-FR I)
3 WEEKLY
TO SELECT PUSH 1, 2 OR 3
To Change the Recording Speed
Press SPEED for SP, LP, SLP.
To Chancel Program Contents
Press ADD/DLT.
• If you use connection type "A" on page 22, the
channel shown in this on-screen display will
always be the cable box output channel number.
DATE START STOP CH
8 SAT 10:00P12:00P 125
TO CHANGE RECORD SPEED
PUSH SPEED KEY
CANCEL:ADO/DLT KEY
ACCEPT:PROG KEY
G Press PROG to end the program.
• This screen appears for confirmation.
P DT START STOP CH SPD
1 dav 9:00a 12:00a 08 SP
3------------ :----------- :— ~ IT
CANCEL:ADD/DLT KEY
SELECT 1-8: a t KEY
ENTER :► KEY
END :PROG KEY
7
Press PROG twice to exit this
mode and return to the normal
screen.
• The PROGRAM TIMER indicator lights on
the front panel.
• If you’re using a cable box, make sure that
it is tuned to the desired channel and the
power is left on for timer recording.
LEAVE CABLE BOX POWER ON
FOR TIMER RECORDING
This display appears if
you use a cable box.
• You can obtain unlisted PlusCode numbers by calling
1-900-454-7587. Call costs approximately $.95 per
minute.
• Avoid overlapping program times.
• An on-screen display will indicate if an invalid PlusCode
number has been entered.
• An on-screen display will indicate when all timer
programs are full.
24