Panasonic Removable Front Panel MP3 WMA CD Player/Receiver with CD Changer Control CQ-DP383U - Manual (Page 37)

O MP3/WMA
Cause/Step
The disc does not conform to any of the file systems supported by this
player. .
»Insert a disc that conforms to the file systems (ISO 9660 Level 1,
Level 2, Joliet, Romeo or Apple Extension to ISO 9660).
The MP3 file is missing the “.mp3’’ file name extension.
»Make sure to add the “.mp3" extension to each MP3 file name.
The WMA file is missing the “.wma” file name extension.
»Make sure to add the “.wma” extension to each WMA file name.
The folders and files recorded on the disc are layered too much.
»As checking of files takes longer in this case, do not record any
unnecessary folders or files other than MP3/WMA on the disc.
»The recording quality differs depending on the encoding software
used, and on settings such as the bit rate. Set the bit rate within the
range specified in the specifications chart (page 51).
■ MP3
It is recommended to set the bit rate to “128 kbps or more” and
"Fixed”.
■ WMA
It is recommended to set the bit rate to “64 kbps or more” and
“Fixed”.
rrr
High-speed writing was executed when MP3/WMA data was recorded on
the disc.
»Decrease writing speed as low as possible.
t>
Files or folders are not recorded in the desired playback order.
»Some writing software iets you specify the recording order by
adding a prefix in the range of "01”-“99”, etc. to the file name.
For details refer to the user manual of your writing software.
The disc does not conform to any of the file systems supported by this
player.
»Insert a disc that conforms to the tile systems (ISO 9660 Level 1,
Level 2, Joliet, Romeo or Apple Extension to ISO 9660).
»There may be a problem with your writing software or CO recorder
(CD-R/RW drive). For detaiis refer to the user manual of your
writing software.
37