F'helpful hint, Tuning procedure – Panasonic TC-43P15 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning Procedure
Use the Programme Number
Up
“
a
”
button to sequentially
check each station.
If necessary, repeat steps 3 to
4 for each Programme Number.
PRE.
After all stations are tuned,
push the “PRE.” (PRESET)
button 4 times.
This returns the set to the
normai viewing condition.
Programme Number
memory locations.
f'Helpful Hint
(1) To tune, push the Main Menu button and Position button on the Remote Control.
By following the display in the Preset Menu, setting can be formed using only the Remote Control.
(2) If a clear picture with correct coiours cannot be obtained when a Broadcast or AV signal is received, refer to the
"Colour System Selection” operation on page 35.
(3) After the Automatic tune is finished, push the Programme Number V’ button to confirm the tuning condition for
each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the Programme Number Skip operation on page 30.
(4) Repeated pushing of the “PRE.” (PRESET) button changes the Preset Menu as follows;
CH SELECT SYS SELECT ^ AUTO TUNE MANUAL TUNE SOUND SYS
(Page 21)
(Page 22)
(Page 24)
(Page 26)
(Page 34)
TV Mode^
SKIP^
(Normal viewing condition) (Page 30)
FINE TUNE
(Page 28)
■COLOUR SYS^
(Page 35)
oc