Panasonic CF-VFS721 - Manual (Page 5)

• Do not leave a disk in the drive while transporting your computer.
Remove a disk by pressing the eject button before your computer is OFF or enters
the suspend/hibernation mode, so the head locking mechanism may engage when
the computer is powered oR*.
• Do not remove a disk while accessing data. This may damage data on the disk,
{While accessing the disk, the access lamp ((^) lights. Be sure that the access lamp is
turned off when removing a disk.)
• Never insert foreign objects into the slot of the Superdisk Drive Pack. It may cause a
malfunction.
• Only use labels that come with disks.
• If dust has accumulated on the head surface, problems may occur when reading or writ­
ing data. In this case, cleaning the drive is recommended using a cleaner kit. (SDD HCL
produced by Imation)
• During the initial 10 seconds after inserting a Superdisk or during data access, a shrill
noise may be produced. This is not a malfunction.
• Do not place the AC adapter to the front of the Superdisk Drive Pack. Magnetic noise
may cause an error.
• Do not disassemble the Superdisk Drive Pack.
<Formatting the disk>
The Superdisk Drive Pack can be used to access both Superdisks and standard floppy disks.
(It may take about 10 minutes to format the Superdisk. Because of this, be sure to disable
the power saving function beforehand.)
An)efrof/m%^^curil ateri in slhe ipf obesslidfiotTOm ¿)A^rtte:prpte'cted^medium=>:T6 s
■i!?s?mrevent” thls^;be; sure: iolmrm at after'con nrrniTiff : betorehann’f hat ■tnevwinie-ff
LS-120 SLIM****j-[Seuings]-LOptions], i8x§H8H§^i3S^3x^3i^8K8i^i^;a