Panasonic TOUGHBOOK CF-47 - Manual (Page 15)

Basic Operation
(Wheel)
Indicates an operation applicable to the Microsoft® IntelliMouse^*^' Wheel mode.
(original) Indicates an operation applicable to the original mode.
Function Touch Pad Operation
Moving the Cursor (Wh^)
(Ori^nal) Move the tip of your finger
lightly over the surface.
Tapping/Ciicking
(Wheei)
(Originai)
Double-Tapping/ (whe^)
Double-Clicking Conginai)
Dragging
While holding down the
button, moving your fin­
ger on the work surface.
or
Two quick taps, but on
the second tap leaving
your finger down (apply­
ing pressure) and moving
it on the work surface.
• When a check mark is added for [use Drag
Lock]
*
After the drag operation (above ; left side), it is
necessary to determine the destination (i.e., loca­
tion of drop) by one tap. Under the condition no
destination is .selected, do not use the suspend or
hibernation function. Nothing is shown on the dis­
play, even after resuming from the suspend or hi­
bernation mode.
In this case, the display will return after a tap or
click is made.
* In [Stan] - [Settings) - [Control Panel] - [Mouse) - [Tap and Buttons]
Scroll*
Scroll a document
(rotate the wheel)
(Wheel)
(Original)
(Wheel) (Original)
Auto Scroll’ (Wheei)
Automatically scroll a document
(move the mou.se after clicking the
wheel)
Operate after pressing the two buttons simultaneously.
• When releasing the auto scroll function:
One tap on the work surface.
The illustration.s shown may differ from the actual physical appearances.
1 5