Casio PX-330 - Manual (Page 11)

11
9.4 Data Entry (06H, 26H)
Format
Send
Sent when there is a change in the parameters assigned to NRPN and RPN.
For details about information assigned to parameters that correspond to NRPN and RPN, see “9.19 NRPN” and “9.20 RPN”.
Receive
Receipt changes the parameter assigned to RPN. This Instrument does not have a parameter that corresponds to NRPN.
9.5 Volume (07H)
Format
Send
Sent when layer balance is adjusted.
Receive
Receipt changes the volume of the corresponding part.
9.6 Pan (0AH)
Format
Note 1:
For information about the relationship between setting values and send/receive values, see “26.5 Pan Setting Value Table”
in “Part VII Setting Values and Send/Receive Values”.
Send
Sent in the following cases.
• When Accomp MIDI Out is on
• When Music Library play is stopped
Receive
Receipt changes the pan setting of the corresponding part.
Message Format: BnH 06H vvH (MSB)
BnH 26H vvH (LSB)
n: MIDI Channel Number
vv: Value
Message Format: BnH 07H vvH
n: MIDI Channel Number
vv: Value
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value (Note1)