Casio PX-330 - Manual (Page 7)

7
Note 1:
Can be changed by the Keyboard Channel setting.
Note 2:
Sent during recorder play only.
When there is no data recorded in the applicable recorder track, the MIDI information of the functions of parts with the
same send channel (A01 through A16) is sent.
1.3 Performance Controller Section
The Performance Controller Section consists of keyboard, pedal and other real-time controllers, as well as blocks that generate
auto accompaniment, auto performance, and other performance information.
These messages are transmitted to the sound generator in accordance with operations, while they are also being sent out
as MIDI messages.
The channel number of the sent message is in accordance with Instrument’s part number.
1.3.1 Auto Accompaniment and Auto Performance MIDI Send
This document what operation is sent by a message in the case of each message type. However, since there are so many
messages sent by an auto accompaniment operation when auto performance and Accomp MIDI Out is turned on, those
messages are not covered here.
2 Conditions that Disable Message Send and Receive
All MIDI message send and receive is temporarily disabled in all of the following cases.
• During instrument startup
• During SD card formatting
• During user data initialization
• Immediately after the recorder is exited
• During storage of registration data
• While storage is selected as the USB device mode
3 Timbre Type Specific Operation
The operation that is performed for a received message depends on the current Timbre Type setting (see “11.1 About Timbre
Type”), which is the operation mode of each sound generator part. Applicable information is provided in the explanations
for each message.