Panasonic PV C2063 - Manual (Page 16)

This unit can be set to automaticaSly power on in one ot 3
modes (TV, Playback, or FM radio).
Yod can al» combine the On-Timer with a one minute
alarm that gradually increases In volume.
□ The clock is set to the correct time.
1
Press PROG* to display SET PROGRAM screen.
1 ) Press AT to select “ON
TIMER”.
2) Press ►to display ON
TIMER screen.
1) Press
AT
to select
desired settings.
2) Press ► to set the
ON-TIMER TIME or
ON-TÍMER mode.
. MaKe^^eM^eiskrsertetTif Playback mode is selected
■ See TM Radio’’ on page 20 for instruoiions on how to prases
PM stations.
j*CH02—CH03"
CH01
FM9 — FMB -
-СН125-Ч
PUY
J
> ON-TIMER mode
selection order
■ FM1
Press
AT
to select
ALARM “ON” or “OFF”.
When “ON" is selected, an alarm will gradually Increase
I!; «Гите for oneminu until canceled by pressing any
button (including VOL + -). move back
To Make Corrections, use
AT
and to move саек
and correct.
Press PROG to set ON TIMER.
. “ON TIMER ser is displayed.
. ON TIMER Indicator lights on the unit.
Rep^r stepTl'ZdTVhen. press ADD/DLT to dear the
time in step 3. Now, press PROG to end.
“ON TIMER END" briefly appears on-screen.
I If no button on the remote or unit
{including a button used to turn
off the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
1Й For assistance, please cal
: 1 - 800 - 21 1-PANA(7262) or send e-mail to : consumerproducts@ panasonic.com