Panasonic PV C2063 - Manual (Page 22)

You cart sst up to 8 programs to be recorded while you are
away.
1
Press PROG* * to display SET PROGRAM screen.
•..'SiTT
1) Press
AT
to select
TIMER
PROGRAMMING.
2) Press ► to display
screen.
• It a program is already in
memory, press AT and ► to
select an unused program
number.
Press
AT
to select
and ► or .4 to set the
recording DATE.
• 1~31 = One time
. DAILY = MON-FRI
• WEEKLY SUN-SAT
= Same lime once a week
Example
^8-9- ^
___ y SELECTA/T Selection Order DAILY
Date
I
WEEKLY WEEKLY WEEKLY
_J
^ /OA-n /QhWt
■ 3 1 — 1 - 2 - -6-
(SAT) (MON) (SUN)
Repeat step 3 to set;
• Start time, Stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP}
Ready Check List
□ All connections are made.
□ Your unit is plugged in.
n The clock is set to correct time.
□ The tape is long enough,
n The record tab is in place.
Press PROG to
end the program.
To Enter More Programs,
press
AT
to select
and ► to set a blank
program number, and
then repeat step 3.
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it is tuned
to the desired channel and She power is left on tor timer
recording.
• PROG TIMER indicator fights on ttie unit
22 For assistance, please call: 1 -800-211 -PANA(7262} or send e-mail to : consumerproducts© panasonic.com