Step 4; ас power supply cord connection, Step 5; rtaaipreparing the wireless system – Panasonic SC-BT730 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 4; АС power supply cord connection
The illustration shows SC-BT730.
пта<
1
Г
!1
Wireless system
I
.......................... \
Main unit
О AC power supply cord
(included)
0
To a household AC outlet
0—1
O AC power supply cord
(included)
0
To a household AC outlet
0
Ferrite core
» Connect only after all other connections are complete.
• This unit consumes a small amount of AC power, even when it is turned off (ВВЕЗ ШЕЕЗ^ approx. 0.05 W*, BBEl approx.
0.1 W*, 1!1Г4сЯ Wireless system: approx. 0.2 W). In the interest of power conservation, if you will not be using this unit for a long
time, unplug it from the household AC outlet.
‘When the “Quick Start" setting is “Off"
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptacle.
STEP 5; rtaaiPreparing the wireless system
Turn on the wireless system after all connections are complete.
’Press [POWER .M. I, i cL)] on the wireless system.
Unit on/off button [POWER I, i (!)]
The wireless system is on.
The wireless system is off.
. I:
Ж * :
WIRELESS LINK indicator
Red:
The wireless system is on and the wireless link is deactivated.
Green
: The wireless system is on and the wireless link is activated.
(“ g]" is also displayed on the main unit’s display.)