Speaker settings, When using the 7.1 ch speaker system, 1 select “test” and press [ok – Panasonic SC-BT730 User Manual

Page 39: Press [a,t ] to adjust the volume of each speaker, 3 press [ok, 2 press [a,t] to select the setting and press [ok, Adjusting speaker level, Delay time, Select “test” and press [ok, Press [ok

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Speaker settings

® Surround/Surround back speakers

Delay time

For optimum listening with 5.1-channel sound, all the

speakers, except for the subwoofer, should be the same
distance from the seating position.

If either distance ® or ® is less than © (o below), find the

difference in the relevant table and adjust the delay time to

make up for the difference.

,r:.l

□ : ©

i: G

I|

r

3

rf

® ® ©: Primary listening distance
O Approximate room dimensions

0

Actual speaker position

Q Ideal speaker position
O Circle of constant primary listening distance

1

Press [ A , T , ◄,►] to select the distance

box (g) and press [OK].

e.g., 5.1ch setting

(A>-

’ EEl

'il Éèi ik K

® Center (C)
© Left Surround (LS), Right Surround (RS)

e.g., 7.1ch setting

Difference

Setting

Approx. 34 cm (1 ft. 1 in.)

1.0 ms

Approx. 68 cm (2 ft. 2 in.)

2.0 ms

Approx. 102 cm (3 ft. 4 in.)

3.0 ms

Approx. 136 cm (4 ft. 5 in.)

4.0 ms

Approx. 170 cm (5 ft. 6 in.)

5.0 ms

■ When using the 7.1 ch speaker system

© Check the distance difference of both the front speakers

and the surround back speakers from the seating position.

@ Set the delay time of the surround back speakers.

Adjusting speaker level

Volume (Channel balance) (

imi

)

(Effective when playing multi-channel audio)

1

Select “Test” and press [OK].

A test signal is output.

2

While listening to the test signal

Press [ A , T ] to adjust the volume of each

speaker.

The volume can be adjusted between -I-6 dB to —6 dB.

• Set each speaker level according to the volume of the

Front (L) and Front (R) speaker volume respectively.

• No signal is output for the subwoofer. To adjust its

volume, see page 24, “Adjusting speaker level during

play".

3

Press [OK].

The test signal stops,

e.g., 5.1ch setting

©-

^ ^

o

0
e

Center (C)

Test

Left Surround (LS), Right Surround (RS)

© Left Surround back (LB), Right Surround back (RB)

2

Press [ A , T ] to select the setting and press

[OK].

® Center speaker

To finish the speaker setting

Press [A, T, ◄, ►] to select “Complete" and press [OK].

Advertising
This manual is related to the following products: