Panasonic KX-T1470BA - Manual (Page 33)

Direct Remote Operation
MONITORING ROOM SOUND
You can monitor sounds in the room where the unit is instaiied. Cail your unit, then;
Code No.
1 Press the Code No. during the greeting
message.
2 Press “S’* right after you hear the
synthesized voice indicating the number
of the recorded messages.
•“Room Monitor'* will be announced.
•You can listen for 30 seconds.
•To listen further, press “5" again within
10 seconds of hearing one beep.
CHANGING THE GREETING MESSAGE
You can change your greeting message. Call your unit, then;
From First Greeting Message to Second Greeting Message
Code No.
/ Press the Code No. during the first greeting
message.
2 Press then press “2” right after you
hear the synthesized voice indicating the
number of the recorded messages.
•“Second greeting”
will be announced.
•The unit will play back the second greeting
message.
The second greeting message has now
been selected.
From Second Greeting Message to First Greeting Message
Press “1" instead of ‘'2" at step 2 of “From First Greeting Message to Second Greeting
Message".
•“First greeting” will be announced.
•The unit will play back the first greeting message.
The first greeting message has now been selected.
-
31
-