Remote code (id code) setting – Panasonic KX-T1470BA User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
REMOTE CODE (ID CODE) SETTING
You must set and remember your own Remote Code Number (ID code).
Choose your Code Number among the digits 00—99, then start your Remote Code
programming with a pointed object such as a ball point pen as follows.
FUNCTION
S E T -
Press FUNCTION to enter the
programming mode.
•The LC Display will flash
Indicating "1 r.
•“Enter ID code.“ will be
announced.
Hold down SET until your desired
number is indicated on LC Display.
•The LC Display will count up the
number;
“11 ->12-^ 13 ...99-^00-^ 01
- > 0 2 - * . . . “
•To adjust the time, you may go
directly to step 2 of “ADJUSTING
TIME“ on page 9 if you wish.
3
When programming is finished, leave the unit as it is.
•After 30 seconds, the unit will end the
programming mode automatically.
Your selected number (on the LC Display) will be stored into memory.
-
8
-