Panasonic CQ-C8300U - Manual (Page 51)

CQ-C8400U CQ-C8300U
ay® For a moving image file or still image file,
press [<] or [>] to select where to save
the file.
The screen showing what will
be overwritten is previewed. •
(Example: GRAPHIC PAHERN)
® Press [SET],
Returns to step®.
(^O Press [<J or [>I to select “YES”.
©Press [SET].
New data overwrites existing data.
CUSTOMIZING COMPLETE
• Customizing is completed successfully,
and operation returns to step ©.
• Operation also returns to step @ when
“No” is selected.
• In case of customization failure,
“CUSTOMIZING FAILED” appears.
© Press and hold [SELl for more than
4 seconds to exit the customize menu.
• The customize mode is released, and the
CD mode is restored.
® Eject the disc.
Note:
• Do not write data on the CD-R/RW disc if, by
so doing, the maximum allowed number of files
listed below will be exceeded. If files are written
on the CD-R/RW disc in a number which exceeds
the maximum number of files allowed as given in
the table below, it will not be possible to use the
excess files.
Type of image Extension Max. number of
fiies allowed
Moving image .pfm 10
Still image .pfs 15
Opening image ,pfo 5
Closing image .pfe 5
• Do not write any data except data for customizing
on the CD-R/RW disc.
• Do not change the file extension since doing so
will make it impossible for the image to be written
properly.
• When data is to be recorded on the CD-R/RW
disc, be absolutely sure to record it in the root
directory (the highest hierarchical level). Do not
write the data in a folder.
• When a CD-RW disc has been inserted into the unit,
it may take a few moments for Its data to be loaded.
• GRAPHIC PAHERN A and STILL IMAGE No.1
cannot be overwritten.
• The bigger the file, the longer customizing will take
(approx. 8 minutes for the largest file with 751KB).
• When the power is turned off, when the engine
is stopped or when the panel is released while
customizing is underway, the customizing
operation will be aborted and the data being
rewritten will be lost. In a case like this, proceed
with the customizing operation again.
• If the corrupted data is selected, “DISPLAY FILE
INCOMPLETE" appears.
• Do not perform any operations while customizing
Is in progress (step ©-©).
• To return to the default image, download the
applicable tile on the web site (page 50) and,
using the CD-R/RW disc containing this file,
perform the rewriting process again.
• The download service may be temporarily shut
down without warning due to unspecified reasons.
Furthermore, it may not always be available In all
areas.
• For further details, refer to Panasonic’s web site
at the address provided below.
http://vww.panasonic.co.jp/global/
CQ-C8400/8300/8200/8100U
51