Panasonic CQ-C8300U - Manual (Page 54)

Troubleshooting
(continued)
□ CD/MP3/WIVIA
□ CD
f Problem
CQ-C8400U CQ-C8300U
CQ-C8200U CQ-C8100U
D C
Possible cause Possible solution D
No playback or disc
ejected
The CD-R/RWs that
are playable on
other devices are not
playable on this unit.
Sound skipping or
noise
( 7
Sound skipping due to
vibration
pr
►
Disc unejectable * •
The disc is inserted upside down.
S
Insert a disc correctly.
There is a flaw or foreign objects
on the disc.
Remove the foreign objects, or use a
flawless disc.
The disc has unplayable formatted
data. Refer to the description about
MP3/WMA for playable sound data
except CD-OA (i.e. music CD).
The unit plays back the ROM track
of a mix mode CD.
Skip the ROM track.
J
The playability of some CD-R/RWs
may depend on the combination
of media, recording software
and recorder to be used even if
these CD-R/RWs are playable on
other devices such as a personal
computer.
Make CD-R/RWs in different
combination of media, recording
software and recorder after referring
to the description about MP3/WMA.
r
There is a flaw or foreign objects
on the disc.
Remove the foreign objects, or use a
flawless disc. For MP3/WMA, refer to
the description about MP3/WMA.
j
r ' . ,
The unit is not sufficiently secured. Secure the unit to the console box ^
with the rear support strap, etc.
The unit is tilted at over 30“ in the
front-to-end direction. Make the angle 30° or less.
J
Something such as a peeled label
obstructs the disc coming out. Press and hold [^: eject] (OPEN) for ^
more than 4 seconds when the front
panel is open (disc forced ejection). In
case that the disc forced ejection does
not work, consult the dealer.
The microcontroller in the unit
operates abnormally due to noise
or other factors.
V
Unplug the power cord and plug it
again. In case the unit is still out of
order, consult the dealer.
>
Note:
• Refer to the section on “Notes on MP3/WMA” {page 36).
54
CQ-C8400/8300/8200/8100U