Key descriptions panasonic – Panasonic RAK-P001 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

KEY DESCRIPTIONS

Panasonic

1. Indicator lights: These lights will turn on or blink depending on the

function that the remote control is performing. The instructions on the
following pages in this manual will explain what the indicator lights

should do depending on what function you are trying to perform.

2. Power key: Press this key to turn a component on or off.

3. Television mode key: Press this key to control your TV features.

4. Receiver mode key; Press this key to control your audio receiver

features.

5. Auxiliary mode key: Press this key to control your auxiliary component.

(AUX=DVD,Cable, or an additional

tv

,

vcr

. or satellite)

6. Pause/Deck 1*2/Dlsc Enter key: If VCR has been selected, press this key

to pause recording or playback of a videotape. Press again to resume

recording or playback, if tape input has been selected, press this key to

choose between Tape Deck 1 and 2. if CD input has been selected, press
this key and select disc by entering digits.

7. Play key: Press this key to start or resume playback of a videotape.

8. Fast Forward/Forward Skip key: Press this key to fast forward a

videotape.

9. Stop key: Press this key to stop playback, recording, rewinding or fast

forwarding of a videotape.

10. Record key: Press this key to start recording a program.

11. Test/Recall key: in Receiver (RCVR) mode, press this key to output a

test signal. In other modes, press this key to switch to the last channel
that you were viewing.

12. Volume (+) key: Press this key to increase the volume.

13. Tuner key: Press this key to select the tuner input on your receiver.

14. CD key: Press this key to select the CD input on your receiver.

15. Tape Monitor key: Press this key to select the tape input on

your receiver.

Advertising