Panasonic component set-up – Panasonic RAK-P001 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Panasonic
COMPONENT SET-UP
CHANGING COMPONENT MODES
After the remote has been programmed for multiple components, you
must set the remote into the mode of the component you wish to controi
by pressing the corresponding component key. For example, if you
turned on your TV and now would like to turn on your VCR, you must
press the "VCR" key to put the remote into the VCR mode before you
press "Power."
1. Press the key of the component that you want to
control. (TV, VCR, SAT, RCVR, or AUX)
tfyou were successful
in changing modes, the green light will blink and the
component key will light up. The red light will blink if there
is nothing
programmed
for that component key
Cl
2. Now you are in controi of that particular component.