Setting up for answering machine, Redialling, Answering calls – Panasonic KX-T2396BA User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up for answering machine
Press the ANS SYS ON/OFF switch to turn on the unit. The PWR/IN USE
indicator light is on. 10 seconds after, the ANS/CALLS indicator light is on
and the unit is ready to answer the next phone call.
PLAYBACK/PAUSE button
►Answer mode:
When a call is received, the unit answers the call and record the
Incoming Message.
► If you do not want the unit to answer the call, press the ANS SYS
ON/OFF switch to turn off the unit. The PWR/IN USE indicator light will
go out.
►Caller's recording time is limited to 2 minutes 20 seconds.
Redialling
The unit can redial the last dialled number automatically. The REDIAL
button will store the last dialled number into memory up to 32 digits.
Lift the handset or press the
MONITOR button, and identify the
dial tone.
Press the REDIAL button.
You can redial once.
You can redial soon after dialling the telephone number by pressing the
REDIAL button without hanging up.
Answering calls
When the telephone rings, lift the handset and start speaking.