Panasonic KX-T2396BA - Manual (Page 7)

Wall mounting
The unit can be mounted on a wall utilizing the washers and screws
provided.
1
2
Turn around the handset hook.
Place the wall mount adaptor as
shown.
Install the screws and washers
using the wall template indicated
below, then mount the unit eyelets
as shown.
To temporarily place the handset
down during a conversation, hook
as shown.
Wall Template
Drill here
-(t
10cm
Drill here
©PLAYBACK/PAUSE Button
(page 30);
Used to play back the recorded
Incoming Messages and to stop
the ICM tape temporarily during
ICM playback.
@PWR/IN USE (Power/ln use)
Indicator (page 14):
It lights when the unit is
powered on, and it flashes while
recording message.
ANS/CALLS (Answer/Calts)
Indicator (page 29):
It lights when the unit is ready
to answer the calls, and it
flashes with indicating the
number of recorded messages
after the message was recorded.
(§)OGM PLAY Button (page 15):
Used to play the recorded
Outgoing Message.
©OGM REG (Record) Button
(page 14):
Used to record the Outgoing
Message.
(©REW (Rewind) Button
(page 30):
Used to rewind the cassette
tape.
©MEMO/2 WAY Button
(page 36):
Used to record a memo
message or a telephone
conversation.
@ANS SYS (Answer System)
ON/OFF Switch (page 12);
Used to turn on and off the unit.
The PWR/IN USE indicator light
when the unit is turned on.
©RINGS (Ring times) Selector
(page 12);
Used to select the number of
rings that it takes for the unit to
answer.
©VOX SENS (Sensitivity)
Selector (page 12)
(@DC IN Jack (page 9)
©RINGER (Ringer volume)
Selector (page 12):
Used to select the ringer
volume HIGH, LOW or OFF.
(§)VOLUME Control (page 38);
Used to adjust the sound level
for the built-in-speaker.