How to add coolant to the coolant surge tank – CHEVROLET Tahoe User Manual

Page 479

Advertising
background image

Notice: Engine damage from running your
engine without coolant is not covered by your
warranty. See Overheated Engine Protection
Operating Mode
on page 476 for information on
driving to a safe place in an emergency.

Notice: Using coolant other than DEX-COOL

®

may cause premature engine, heater core, or
radiator corrosion. In addition, the engine
coolant could require changing sooner, at
30,000 miles (50 000 km) or 24 months,
whichever occurs first. Any repairs would not
be covered by your warranty. Always use
DEX-COOL

®

(silicate-free) coolant in your

vehicle.

How to Add Coolant to the Coolant
Surge Tank

If you have not found a problem yet, check to see
if coolant is visible in the surge tank. If coolant
is visible but the coolant level is not at or above the
FULL COLD mark, add a 50/50 mixture of
clean, drinkable water and DEX-COOL

®

coolant at

the coolant surge tank, but be sure the cooling
system, including the coolant surge tank pressure
cap, is cool before you do it. See Engine
Coolant
on page 470 for more information.

479

Advertising
This manual is related to the following products: